TF5 Half Amp Fuse(sku: 6726)
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
SSP CONTROLLER SENTRY XPRESS 1700F RAMP/HOLD
CORDSET, 15 AMP, 120 VOLT, NEMA 5-15, 6 FOOT
MS1 Porcelain Insulators(sku: MS1)
MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.
MS6 Element Connectors(sku: MS6)
MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
THERMOCOUPLE with beads for the SC and BlueBird kilns.
TF9 Fuse Holder for Switch Box of Digital Kilns(sku: TF9)
Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).
BlueBird XL Ceramic Fiber Top with Elements(sku: 2624-1)
The new BlueBird XL ceramic fiber top is the best we have ever offered. In the previous top, the elements were embedded between two layers of ceramic fiber board. In the new vacuum-formed top, the elements stay cooler and last longer because they are embedded just beneath the inner surface. The previous design used coiled elements. Because the new top has sinusoidal “wavy” elements, much more of the element wire is near the ceramic fiber surface.
TF72 Sentry Xpress Control Cable(sku: 6060-2)
TF72 Sentry Xpress Control Cable
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2020,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"