HW5 Large Lid Handle(sku: 1029)
Lid and side handles for large kilns, 10 sides and more.
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Element, Janus Dragon, S0931, side/top/bottom, 240 volt, 13.3 ohm, 4 per kiln.
Element, Janus Dragon, S0931, door, mid, 240 volt, 7.3 ohms, 2 per kiln.
Element, Janus Dragon, S0931, Door/top/bottom, 240 volt, 4.3 ohms, 4 per kiln.
Element, Janus Dragon, S0931, side, mid, 240 volt, 22 ohms, 2 per kiln.
TF5 Half Amp Fuse(sku: 6726)
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
PY80-5 Thermocouple(sku: 6750-15)
Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge complete with beads, ceramic block and lead wires for 3 1/2” - 4 1/2” wall kilns. (Order the PY81-5 if you do not need to replace the ceramic block or lead wires.) Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.
CONTROL BOARD, SENTRY II, 2400 DEGREES F (CONE FIRE)
Sentinel Smart Touch Controller, replacement part(sku: 6844-71)
The Sentinel Smart Touch controller can replace the standard Sentry 2.0 12-key controller. The price shown here is for the Sentinel controller purchased for an existing kiln.
The Sentinel Smart Touch is made by Bartlett Instruments of Fort Madison, Iowa.
Ramp-Hold programs can have a customized program title, which is entered through the touch screen. Store 12 custom programs with up to 32 segments per program. The Sentinel includes Novice Mode, which adds questions to guide you during programming.
The controller can be updated through WiFi. View the progress of a firing in graph mode. The firing schedule can be edited during firing with Skip Step, Add Segments, Add Temperature, and Add Time. The Sentinel can turn a kiln vent or gas injection flow meter on or off for each segment of a program.
MS1 Porcelain Insulators(sku: MS1)
MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.
MS6 Element Connectors(sku: MS6)
MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Optional Type-S premium-grade thermocouple for 4" - 4 1/2" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures. Note: Select the correct thermocouple type under Options on your Sentry controller. (Includes the Type-S lead wires and ceramic protection tube; does not include the ceramic block.)
Optional Type-S premium-grade thermocouple for 4" - 4 1/2" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures. Note: Select the correct thermocouple type under Options on your Sentry controller. (Includes the Type-S lead wires, ceramic protection tube, and the ceramic block.)
TF9 Fuse Holder for Switch Box of Digital Kilns(sku: TF9)
Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).
PL3 Peephole Plug 1 Inch(sku: 2122)
PL3 Peephole plug, straight, 1" (25.4 mm) wide. Plug the peepholes if your kiln is equipped with a downdraft vent. Keep a spare plug on hand.
PT-1 Protection Tube, S-Type Thermocouple(sku: 60032)
Ceramic protection Tube for S-type thermocouple, 3 1/2" - 4 1/2" (88 mm - 114 mm) wall kilns. Secure in the firebrick wall with a small amount of kiln cement.
PY81-5 Thermocouple, K-Type 3.5-4.5 inch Wall Kiln(sku: 60179-5)
Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge with beads for 3 1/2” - 4 1/2” wall kilns (less ceramic block and wires) Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.
TF71 Sentry Control Cable(sku: 6060-1)
TF71 12-key Sentry Control Cable. You will need this part when upgrading from the earlier DTC-series controllers to the Sentry 12-key or Sentinel Smart Touch.
TF34 30 Amp CC Fuse(sku: 6076-1)
TF34 30 Amp CC Fuse, for heavy amperage kilns. (The fuse holder is inside the kiln control panel.) The fuse must be aligned properly--see instructions in the Sentry Trouble Shooter.
Relay, 60 amp mercury, 2P 240 volt, w/208-240 volt coil. The relay sends power to the elements of digital kilns.
TF3 Relay 30 Amp(sku: 6355)
Relay, 30 amp, 12 volt coil. The relay sends power to the elements of digital kilns.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2020,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"