Paragon Kiln Products, Parts & Accessories
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Parts For Kiln: GF10B, Discontinued

Name

Description

Quantity

Price

HW5 Large Lid Handle

(sku: 1029)

Lid and side handles for large kilns, 10 sides and more.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.61

ST1

(sku: 9002)

PLASTIC FEET FOR KILN STAND

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$0.00

BR-K-10-2.5

(sku: BR-K-10-2.5)

PLAIN, NO GROOVE BRICK, 10 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$15.80

BR1099

(sku: BR1099)

BRICK BOTTOM FOR 99, 24, 24-3

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$280.53

BR11G10BW/ELE

(sku: BR11G10BW/ELE)

LID FOR GF10B WITH ELEMENT. The lid comes with a band, but it does not include hardware such as the hinge and handle.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$0.00

CR6

(sku: CR6)

CORDSET, 50 AMP, 240 VOLT, NEMA 6-50, 6 FOOT

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$77.80

ELGF10

(sku: ELGF10)

ELEMENT GF10B, 240 VOLTS, 19 OHMS, 2 PER KILN

The element comes pre-stretched for a precise fit. Element connectors are included with each new element.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$0.00

Fiber Lid Replacement Part

(sku: Fiber Lid Replacement Part)

You can replace your firebrick lid with a ceramic fiber one. (Please specify the kiln model when ordering. The photo shows a Fusion-8 lid but represents all Fusion models.) Serious glass artists have long requested the fiber lid for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainless steel outer lid cover.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$0.00

MS8

(sku: MS8)

PILOT LIGHT with push-on terminals.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.50

Rolling Stand Replacement Part, 24x24x18 inches

(sku: SKU STD242418-BA)

The replacement stand for your Paragon 10-sided top-loading glass kiln has locking casters, and a mounting bracket for the Orton Kiln Vent. Move the kiln out of the way when not in use. The glass kiln deluxe stand is 18” high, which raises the kiln to a comfortable height. Assembly required; instructions included. This deluxe stand replaces the discontinued standard kiln stand. 24” square x 18” high. Ships in a 27” x 27” x 8” carton.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$188.29

PL2 Peephole Plug Cone Shaped

(sku: 2000)

PL2 Peephole plug, cone shaped. Keep a spare on hand in case you drop one. The plug is essential for kilns equipped with a downdraft vent.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$8.37

BP10 Full Formed Steel Base, 10 Sided Kilns

(sku: 3090)

The full-formed steel base for 10-sided kilns. The base is made of long-lasting galvanized steel. It protects the firebrick kiln bottom. Install the steel base by removing the old one and sliding the tabs of the new one up behind the stainless steel case. Then fasten with screws.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$60.71

SW6 Infinite Control Switch, 240V

(sku: 4151)

Infinite control switch, 240 volt. The switch cycles the elements on and off. The higher the switch setting, the longer the elements stay on with each cycle. on High, the elements stay on continuously. (Note: If you are replacing a Duncan KM300 switch with the SW6, the switch must be installed upside-down. --Thank you)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$44.79

KN4 Knob for Infinite Control Switch

(sku: 4133)

KN4 Knob for Infinite Control Switch, with printed numbers. Black plastic and white numbers.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$9.43

MS1 Porcelain Insulators

(sku: MS1)

MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$9.43

MS6 Element Connectors

(sku: MS6)

MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$8.72



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Ovens
  • Knife Making Ovens
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"