CORDSET, 20 AMP, 240 VOLT, NEMA 6-20, 6 FOOT
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
PILOT LIGHT with push-on terminals.
ST7 Rubber Feet(sku: 1059)
Rubber feet for small table-top kilns. Set of 4.
MUFFLE Ceramic Fiber for J14-2(sku: 2600)
Ceramic fiber firing chamber (muffle) for the J14-2, and TnF-J14-2. The firing chamber includes embedded elements. Before ordering a new muffle, check the element connectors. If one has burned off, you can usually repair the muffle without replacing it. Merely replace the element connector.
SW6 Infinite Control Switch, 240V(sku: 4151)
Infinite control switch, 240 volt. The switch cycles the elements on and off. The higher the switch setting, the longer the elements stay on with each cycle. on High, the elements stay on continuously. (Note: If you are replacing a Duncan KM300 switch with the SW6, the switch must be installed upside-down. --Thank you)
KN4 Knob for Infinite Control Switch(sku: 4133)
KN4 Knob for Infinite Control Switch, with printed numbers. Black plastic and white numbers.
MS1 Porcelain Insulators(sku: MS1)
MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.
MS6 Element Connectors(sku: MS6)
MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2019,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"