E and Q Series New-Style Door Latch(sku: 3840-5)
The tension on the new-style door latch is adjustable. This latch can be retrofitted onto the older E and Q series Paragon kilns. Remove the old latch and mount the bracket of the new latch to the kiln door.
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
CORDSET, 15 AMP, 120 VOLT, NEMA 5-15, 6 FOOT
ELEMENT E9AX, 120 VOLTS, 13.1 OHMS, 1 PER KILN
The element comes pre-stretched for a precise fit. Element connectors are included with each new element.
PILOT LIGHT with push-on terminals.
ST7 Rubber Feet(sku: 1059)
Rubber feet for small table-top kilns. Set of 4.
PY-1 Meter for T-2 Pyrometer(sku: 4176)
Pyrometer with large 4 1/2” (114 mm) wide display for easy viewing. Includes the meter without case, thermocouple wires, and K-Type thermocouple.
MS1 Porcelain Insulators(sku: MS1)
MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.
SW5 Infinite Control Switch, 120V(sku: 4132)
SW5 Infinite control switch, 120 volt. The switch cycles the elements on and off. The higher the switch setting, the longer the elements stay on with each cycle. on High, the elements stay on continuously.
MS6 Element Connectors(sku: MS6)
MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2020,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"