Paragon GL-22ADTSD Glass Fusing Kiln
Create breathtaking glass in the deluxe GL-22ADTSD Professional Series glass kiln. The GL-22ADTSD is proudly made in America by skilled craftsmen and designed for those whose livelihood depends on glass production. The kiln includes features not found on competitive kilns.
Elements in the Top, Walls, and Door
The GL-22ADTSD digital kiln heats from the top, three sides and door for unsurpassed heat distribution. It is 13 1/4” high inside with room to bend glass for curved windows or cabinet doors and to repair lampshades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface. Explore small-to-medium sized casting and pâte de verre. Enjoy the glittering beauty of dichroics. Make treasured gifts.
The GL-series top elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.
Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements, seated in dropped, recessed brick grooves, span the three walls in six horizontal rows.
The kiln’s door elements offer unsurpassed heat distribution for difficult pieces. (The door, with elements, is always hinged on the right side.)
Adjust the Ratio of Heat Between the Top and Walls
The kiln uses advanced power ratio technology, pioneered by Paragon, to balance the heat between top and side/door elements. Program the digital controller to balance the heat between the top and sides in increments of 10%. (i.e., 100% top - 0% sides, 50% top - 50% sides, 80% top – 20% sides, etc.) Set the heat balance for any combination desired between the top and sides so that the total heat output equals 100%. Imagine the precise control you will have in adjusting the kiln to slump glass or to improve heat distribution over large fused panels.
Heavy Duty Construction
Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
Spring-Loaded Door Latches
The spring-pressure latch and a ½" recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.
Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included. The optional glass viewing windows are not available on the GL-22ADTSD.
Digital Temperature Controller
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire.
Door Safety Switch
The GL-22ADTSD is equipped with a door safety switch. When you open the door, the switch turns off the power to the elements; the digital controller continues to operate while the elements are off.
Environmentally Friendly Paint
The GL-22ADTSD has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
Optional Ceramic Fiber Top
The standard GL-series kiln comes with an insulating firebrick top, grooved for heating elements. The GL-22AD upgrade option is a ceramic fiber top with element grooves. The fiber top helps keep the glass clean during firing.
Optional Kiln Stand
The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.
ST-8: without casters—30 ¼” square x 28 ¼” high, 147 lb.
ST-8-1: with 2" steel casters—30 ¼" square x 30 ¾” high, 150 lb.
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.
Have something good to say about the GL-22ADTSD? Tell Us