How close does the Sentry Xpress maintain the temperature during a hold?
The normal temperature fluctuation during hold is plus or minus 2 degrees C. Ordinarily, the only time the temperature goes beyond the 2 degree fluctuation is after a fast rate, which causes the temperature to overshoot. The overshoot usually stabilizes within 15 minutes. You can avoid temperature overshoot by programming a slower rate approximately 50 degrees F (27 degrees C) below the hold temperature.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Fax: 972-222-0646 Contact Us