Kiln Support
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu


I'd like to fire a digital kiln to cone 6, hold for 8 minutes, and then go to 1600 degrees F and hold for 1 hour. How do I do that?

In Ramp-Hold mode, program a cone 6 firing with an 8 minute hold at the end. You will need an additional segment for controlled cooling down to 1600 F. Program a segment to a target temperature of 1600F. Use a Full rate with a one hour hold at 1600 F (871 C).

After the kiln finishes the 8 minute hold at cone 6, it will begin the cooling segment. The Full rate will turn off the heating elements from cone 6 down to 1600 F (871 C). Then the elements will maintain the hold for one hour.

Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader


  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"