Kiln Support
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu


The voltage from the transformer to my controller is 32. Is that too high?

The transformer reduces the circuit voltage at a ratio of 10 to 1. For example, the transformer reduces 240 volts to 24. Sometimes, however, the voltage from the transformer is higher than a 10:1 ratio. This is usually not a problem, because the controllers can operate normally at 19 - 26 volts AC. The controllers can operate above 26 volts, but you risk damaging the controller when operating at higher voltages.

If the controller is not working properly on 32 volts, you should replace the transformer. But if the controller is working on 32 volts, it should be okay.

Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader


  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"