Kiln Support
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu


The controller shows the wrong temperature. Tapping the kiln’s switch box makes the correct temperature appear.

This is a symptom of loose thermocouple connections. The thermocouple senses temperature inside the kiln. If the wires from the thermocouple to the controller are loose, the temperature in the display may fluctuate.

Check the connector screws on the thermocouple block. It is on the other side of the wall where the thermocouple appears in the firing chamber. Also make sure the thermocouple wire connectors are tight on the back of the controller circuit board. (Note: Some of the small kilns do not have a thermocouple block. The only thermocouple connections on those kilns are at the back of the controller.)

Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader


  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"