TF5 Half Amp Fuse
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
MS6 Element Connectors
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
RELAY 30 AMP, 12 VOLT COIL
CSS 120V 15A 1-15P CORD SET
SSP CONTROLLER SENTRY XPRESS 1700F RAMP/HOLD
TF72 Sentry Xpress Control Cable
TF9 Fuse Holder
TF9 Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).
CORDSET, 15 AMP, 120 VOLT, NEMA 5-15, 6 FOOT
MS1 Porcelain Insulators
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
THERMOCOUPLE with beads for the SC and BlueBird kilns.
Element for Blue Bird, 120 volt 15 ohm, 1 per kiln. This is for the early Blue Bird kilns that had a separate removable element. The newer kilns have a replacement ceramic fiber roof with embedded elements.
BlueBird Ceramic Fiber Top with Embedded Element
The new BlueBird ceramic fiber top is the best we have ever offered. In the previous top, the element was embedded between two layers of ceramic fiber board. In the new vacuum-formed top, the element stays cooler and lasts longer because it is embedded just beneath the inner surface. The previous design used a coiled element. Because the new top has a sinusoidal “wavy” element, the entire element is near the ceramic fiber surface.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"