MS6 Element Connectors(sku: 4003)
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Caldera Top/Bottom(sku: BRCalderaTB)
The Caldera top and bottom are interchangeable. Lift off the damaged top or bottom and slide on the new one. Includes the stainless steel band with tighteners and two handles. Fully assembled. (BR Caldera TB)
Caldera Top with 2 inch x 2 inch Glass Window(sku: CAL-DR-W-1)
Order a separate firebrick top with 2” x 2” high-temperature window for a Caldera that you already own. It installs in minutes.
Watch the bright red kiln interior through the window. (The glass is rated to 2300°F.) This is especially convenient for glass fusing. Watch your glass treasures progress through every stage from tack fuse to full fuse. (Note: always wear firing safety glasses when viewing the kiln interior.)
Note: The Caldera will not reach its maximum temperature when equipped with the glass window. To reach maximum temperature, fire the Caldera with the plain lid.
CS RM 250V/10A HAR 3G1.0 2.5M SWISS ASE 1011 TYPE 12
ELEMENT, CALDERA, 240V, 17.1 OHM, 2 PER KILN
The element comes pre-stretched for a precise fit. Element connectors are included with each new element.
PILOT LIGHT with push-on terminals.
STEPLESS CONTROL SWITCH 120 VOLTS
HW4 Small Lid Handle(sku: 1001)
Lid handle for small kilns, 8 sides or less.
MS1 Porcelain Insulators(sku: 2013)
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
Caldera Stand 34740-23(sku: 34740-23)
The original Caldera and Caldera-S kilns were placed on top of four firebrick blocks. The newest Calderas come with a 2 1/2" high x 14" x 12 3/4" steel stand, complete with rubber feet.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"