MS6 Element Connectors(sku: 4003)
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
TF5 Half Amp Fuse(sku: 6726)
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
HW5 Large Lid Handle(sku: 1029)
Lid and side handles for large kilns, 10 sides and more.
MS1 Porcelain Insulators(sku: 2013)
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
TF9 Fuse Holder(sku: 6018)
TF9 Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).
Vulcan Fiber Retaining Ring Insert(sku: BRS0797ILID)
The Vulcan crucible kiln includes a 2”-thick, ceramic fiber board retaining ring insert that fits into a recess at the top of the walls. (The retaining ring is rated to 2300F / 1259C.) Cut a hole in the fiber board retaining ring to match the size of a crucible. The fiber board holds heat inside the kiln when you open the lid. The Vulcan is 13 ½” wide x 18” deep. The fiber board retaining ring in place reduces the firing chamber to 15” deep. BRS0797ILID
Vulcan Bottom BRS0797BOTASY(sku: BRS0797BOTASY)
The Paragon Vulcan crucible kiln has a separate bottom section that attaches to the kiln with spring twist locks. The firebrick bottom includes a 2 1/2" high row of wall bricks. In the photo, the bottom section is attached to the Vulcan kiln.
Kiln stand for 6-, 7-, and 8-sided kilns. 9" tall. Assembly required. (This stand is furnished with a new kiln.)
Sentinel Smart Touch Controller, replacement part(sku: 6844-71)
The Sentinel Smart Touch controller can replace the standard Sentry 2.0 12-key controller. The price shown here is for the Sentinel controller purchased for an existing kiln.
The Sentinel Smart Touch is made by Bartlett Instruments of Fort Madison, Iowa.
Ramp-Hold programs can have a customized program title, which is entered through the touch screen. Store 12 custom programs with up to 32 segments per program. The Sentinel includes Novice Mode, which adds questions to guide you during programming.
The controller can be updated through WiFi. View the progress of a firing in graph mode. The firing schedule can be edited during firing with Skip Step, Add Segments, Add Temperature, and Add Time. The Sentinel can turn a kiln vent or gas injection flow meter on or off for each segment of a program.
TF71 Sentry Control Cable(sku: 6060-1)
TF71 12-key Sentry Control Cable. You will need this part when upgrading from the earlier DTC-series controllers to the Sentry 12-key or Sentinel Smart Touch.
TF3 Relay 30 Amp(sku: 6355)
RELAY 30 AMP, 12 VOLT COIL
BP8 Full Formed Steel Base, 8 Sided Kilns(sku: 3005)
BOTTOM PAN FOR 8 SIDED KILNS
Optional Type-S premium-grade thermocouple for 4" - 4 1/2" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures. Note: Select the correct thermocouple type under Options on your Sentry controller. (Includes the Type-S lead wires and ceramic protection tube; does not include the ceramic block.)
PLASTIC FEET FOR KILN STAND
CONTROL BOARD, SENTRY II, 2400 DEGREES F (MAX TEMP)
STRAIGHT, 2 GROOVE BRICK, 8 SIDE, 3" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
TERMINAL BRICK 2 GROOVE, 8 SIDE, 3" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
LID FOR 82B-3. The lid comes with a band, but it does not include hardware such as the hinge and handle.
CORDSET, 30 AMP, 240 VOLT, NEMA 6-30, 6 FOOT
ELEMENT, VULCAN TBM 240V 2.9 OHM, 5 PER KILN
The element comes pre-stretched and bent at the wallbrick corners for a precise fit. Element connectors are included with each new element.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"