TF5 Half Amp Fuse(sku: 6726)
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
MS6 Element Connectors(sku: 4003)
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
PL2 Peephole Plug Cone Shaped(sku: 2000)
PL2 Peephole Plug Cone Shaped
PLASTIC FEET FOR KILN STAND
TF72 Sentry Xpress Control Cable(sku: 6060-2)
TF72 Sentry Xpress Control Cable
TF9 Fuse Holder(sku: 6018)
TF9 Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).
HW4 Small Lid Handle(sku: 1001)
Lid handle for small kilns, 8 sides or less.
PY80-4 Thermocouple(sku: 6750-14)
Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge complete with ceramic block and lead wires for 2 1/2” - 3” wall kilns. (Order the PY81-4 if you do not need to replace the ceramic block or lead wires.) Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.
PY81-4 Thermocouple(sku: 60179-4)
Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge for 2 1/2” - 3” wall kilns (less ceramic block and wires). Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.
PLAIN, NO GROOVE BRICK, 7 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
TF3 Relay 30 Amp(sku: 6355)
RELAY 30 AMP, 12 VOLT COIL
SSP CONTROLLER SENTRY XPRESS 1700F RAMP/HOLD
Rolling Stand Replacement Part, 18x18x18 inches(sku: SKU STD181818-BA)
The replacement stand for your Paragon 7- and 8-sided top-loading kiln has locking casters and a mounting bracket for the Orton Kiln Vent. Move the kiln out of the way when not in use. The deluxe stand is a comfortable 18” high. Assembly required; instructions included. This deluxe stand replaces the discontinued standard kiln stand. 18” square x 18” high. Ships in a 25” x 19” x 8” carton.
BOTTOM PAN FOR 7 SIDED KILNS
PLAIN, NO GROOVE HALF BRICK, 7 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
BRICK BOTTOM FUSION 7
BRICK TOP FUSION 7 W/O ELEMENT. The lid comes with a band, but it does not include hardware such as the hinge and handle.
CORDSET, 15 AMP, 120 VOLT, NEMA 5-15, 6 FOOT
ELEMENT FUSION 7 TOP, 120V, 2 PER KILN
The element comes pre-stretched for a precise fit. Element connectors are included with each new element.
Fiber Lid Replacement Part(sku: Fiber Lid Replacement Part)
You can replace your firebrick lid with a ceramic fiber one. (Please specify the kiln model when ordering. The photo shows a Fusion-8 lid but represents all Fusion models.) Serious glass artists have long requested the fiber lid for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainless steel outer lid cover.
MS1 Porcelain Insulators(sku: 2013)
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"