Paragon Kiln Products, Parts & Accessories
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Options For Kiln: GL-44AD, Old Style

Name

Description

Quantity

Price

FSGL44A FIB Ceramic Fiber Shelf Kit

Rigid fiber furniture kit (also called a shelf kit) for the GL-44 series, Pearl-44 series, and equivalent sized kilns.

The light-weight ceramic fiber shelf has been rigidized and planed flat. Note: Leave the shelf in the kiln between firings--excessive handling will degrade the shelf. Since the fiber shelf does not store heat, it can cool faster than the glass. Therefore, crash cooling the kiln can shock the glass.

Coat the new shelf with glass separator. Use firing paper between the glass and the shelf. This will protect the back of the glass from the inevitable surface imperfections in the delicate shelf.

This shelf kit is available only with the purchase of a new kiln, because we do not ship the shelf separately.

1 - 42" long x 20" wide x 1 1/2" thick ceramic fiber shelf

3 - 18" long, 1 1/2" wide square posts

$946.05

FSGL44A Furniture Kit

Recommended furniture kit for the Paragon GL-44 series, Pearl-44 series, and equivalent sized kilns. Included:

2 C-20 Shelves (20” square x 5/8”)

8 – 1/2” long, 1” wide Square Posts

2 lb. Glass Separator

Shipping size: 24” long x 24” wide x 9” high

Glass is fired in the kiln on a shelf. Coat the shelf with glass separator to prevent the glass from sticking to the shelf. Place short posts between the shelf and the kiln bottom to circulate heat around the shelf.

Paragon’s durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents of this shelf kit.)

$269.28

TF62

RS232 PORT ON SENTRY 2 CONTROLLERS (PC CONTROL) The RS232 is a computer port mounted to the kiln. You can monitor the kiln from a computer and store a record of each firing on your hard drive. Print graphs of firings.

$414.12

VENTMASTER 120, Installed on Kiln

KILNVENT MASTER 120V M9 VENT MASTER, Installed (on large 4-sided kilns)

The patented Orton Vent Master not only vents fumes but also improves firing results. At this price, the vent is factory-installed onto the back of the kiln.

It pulls fresh oxygen into the kiln for brighter colors, especially noticeable with red and orange glazes and decals. Fire red and green glazes in the same load without glaze contamination. The Vent Master draws air from the kiln, dilutes it with room air, and pushes it outdoors through a vent hose.

The extra oxygen and increased air movement help burn carbon out of the clay, which helps eliminate a host of firing problems: bloating, dark patches in the clay, porcelain mildew, pinholes, pitting, blisters, and bubbles.

The Vent Master removes fumes containing volatile metals, fluorides and sulphur oxides. You can fire even lusters, decals, metallics, and pate-de-verre glass without strong odor.

The flow of fresh air helps even out the temperature throughout the kiln. The vent also extends the life of the Kiln Sitter tube assembly, since fumes by-pass the tube. You will enjoy the convenience of the Vent Master. Throughout the firing, keep the lid closed and peephole plugs inserted. You no longer need to remember to lower the hot lid from vented position.

The Vent Master increases firing time by about five minutes for firings up to cone 4; 12 minutes for firings from cone 4 to 10. It has little effect on maximum temperature. At 132 watts, electrical consumption of the Vent Master motor is only pennies per firing.

From the shut-off temperature down to 1000°F, the Vent Master has little effect on cooling time. From 1000°F to room temperature, it reduces cooling time by about two hours.

As with Paragon kilns, the Orton Vent Master can be made for any electrical system in the world. Approved for use in the 1992 Uniform Mechanical Code. UL/CSA approved for UL Listed kilns. ETL Listed, CE Certified. Two year limited warranty.

The Vent Master requires a separate 120 volt wall plug unless your kiln is equipped with the AOP vent. (Vents that plug into the AOP of a 208 or 240 volt kiln must be the same voltage as the kiln.)

A 3’ long 2” duct comes with each vent. The 2” duct runs between the collection cup and the blower motor. Use 4” aluminum dryer duct or 4” PVC pipe between the motor and the vent outlet. (Do not use vinyl dryer duct.)

Since the vent motor is away from the kiln, there is no vibration in the kiln, the motor is kept away from the heat of the kiln, and the fan is easy to clean. The Vent Master works with all Paragon kilns except the smallest tabletop models. The Vent Master can vent two kilns. For the second kiln, order the Vent Master Expansion Kit.

$635.46

Mercury Relays, Two TF-26s per kiln 30 amps ea

Order your new kiln with the factory installed mercury relay upgrade, The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays and are available as an option on new kilns.

$257.04

TF61 AOP Outlet

AUXILLARY OUTPUT FOR SENTRY 12-KEY CONTROLLERS (VENT CONTROL) The AOP (Auxiliary Output) is an electrical outlet factory-installed on the kiln. Plug either a downdraft vent or an external alarm into the AOP. Control the vent with Cone-Fire or Ramp-Hold modes.

We use both NEMA 5-15R (for 120V) and NEMA 6-15R (for 240V) receptacles, depending on the voltage of the Kiln. Typically, a 240V KilnVent is used on a 240V Kiln, so the 6-15R is selected. A 120V KilnVent can be used in situations where there is an available 120V supply, such as in a 120V Kiln or a Kiln with a step down Transformer located inside the Switch box.

$109.14

Berry Paint

At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Hot Pink Paint

At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Jade Paint

At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Navy Paint

At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Purple Paint

At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Turquoise Paint

At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Firing Safety Glasses

Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.

Paragon no longer sells firing safety glasses. Instead, you can order them directly from Amazon. We recommend green #3 lenses.

Click here to order glasses from Amazon.com

$0.00



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"