1 inch x 3 inch Glass Window, Fusion Style
Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage from tack fuse to full fuse.
DT2-7 Digital Hand-Held Pyrometer, Degrees F
Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Monitor electric pottery firings up to cone 10.
The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 2372F. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F.
The DT2-7 comes with a thermocouple, thermocouple wire, 9 volt battery, carrying case, wall mount screws, stand, and printed instructions. Prop the meter on the metal stand for easy viewing.
The DT2-7 is easy to use. Turn on the switch and insert the thermocouple into the kiln. The DT2-7 is easier to read than analog (needle-indicator) meters.
DT2-9 Digital Hand-Held Pyrometer, Degrees C
Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln.
The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees C up to 1287C. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 0 – 50 degrees C.
FSGF7B Furniture Kit
Recommended furniture kit for the Paragon Fusion-7, GF-7B, and equivalent sized kilns. Included:
1 C-13 Shelf (13” round x 1/2”)
4 – 1/2” long, 1” wide Square Posts
1 lb. Bag Glass Separator
Shipping size: 19” long x 18” wide x 7” high
Glass is fired in the kiln on a shelf. Coat the shelf with glass separator to prevent the glass from sticking to the shelf. Place short posts between the shelf and the kiln bottom to circulate heat around the shelf.
Paragon’s durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents of this shelf kit.)
Lid Safety Switch
The optional lid safety switch turns off power to the heating elements when the lid is raised. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid. IMPORTANT: The lid safety switch is required in some areas such as Canada and Europe.
PY-71 Thermocouple with Lead Wires and Plug
Thermocouple, K-type, with 5’ lead wires for the DT2-7 pyrometer. 4 1/4” long thermocouple fits into a 1/4” wide hole. Thermocouple flat-pin mini connector fits many meters such as the Fluke 53/54 IIB.
Pyrometer, needle indicator, 2200 degrees F maximum temperature. Includes a K-type thermocouple.
18" wide x 12 1/4" tall deluxe stand with casters. Conveniently move your kiln out of the way when not in use. Heavy-duty stands remain rock-steady with power pressed steel frame and reinforced legs. 2" smooth rolling steel casters included. Shipped fully assembled. Shipping dimensions: 18" wide x 12" deep x 24" high.
Firing Safety Glasses
Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.
Paragon no longer sells firing safety glasses. Instead, you can order them directly from Amazon. We recommend green #3 lenses.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"