Paragon Kiln Products, Parts & Accessories
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Options For Kiln: GF6B, Discontinued

Name

Description

Quantity

Price

1 inch x 3 inch Glass Window, Fusion Style

Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage from tack fuse to full fuse.

$67.32

DT2-7 Digital Hand-Held Pyrometer, Degrees F

Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Monitor electric pottery firings up to cone 10.

The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 2372F. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F.

The DT2-7 comes with a thermocouple, thermocouple wire, 9 volt battery, carrying case, wall mount screws, stand, and printed instructions. Prop the meter on the metal stand for easy viewing.

The DT2-7 is easy to use. Turn on the switch and insert the thermocouple into the kiln. The DT2-7 is easier to read than analog (needle-indicator) meters.

DT2-7 SPECIFICATIONS

  • Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
  • 1/2” liquid crystal display digits
  • Low power consumption
  • Measurement range: -50F – 2372F
  • Environmental operating temperature: 32F – 122F
  • Degrees F display
  • Type-K thermocouple with 5’ of wire
  • Requires 9 volt DC battery
  • Battery life: 150 – 200 hours of continuous use
  • Low battery indicator message
  • Weight: 5 oz.
  • Warranty: 90 days
  • Replacement thermocouple: PY-71

$100.98

DT2-9 Digital Hand-Held Pyrometer, Degrees C

Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln.

The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees C up to 1287C. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 0 – 50 degrees C.

DT2-9 SPECIFICATIONS

  • Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
  • 1/2” liquid crystal display digits
  • Low power consumption
  • Measurement range: 1287C
  • Environmental operating temperature: 0C – 50C
  • Degrees C display
  • Type-K thermocouple with 5’ of wire
  • Requires 9 volt DC battery
  • Battery life: 150 – 200 hours of continuous use
  • Low battery indicator message
  • Weight: 5 oz.
  • Warranty: 90 days
  • Cost of replacement thermocouple: $26.00

$100.98

FSGF6B Furniture Kit

Recommended furniture kit for the Paragon Fusion-6, GF-6B, and equivalent sized kilns. Included:

1 C-10R Shelf (10” round x 1/2”)

4 – 1/2” long, 1” wide Square Posts

1 lb. Bag Glass Separator

Shipping size: 19” long x 18” wide x 7” high

Glass is fired in the kiln on a shelf. Coat the shelf with glass separator to prevent the glass from sticking to the shelf. Place short posts between the shelf and the kiln bottom to circulate heat around the shelf.

Paragon’s durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents of this shelf kit.)

$38.56

Fusion 6 and 7 Bead Door

Adding the optional 2 1/2” x 6 1/2” bead door to your Fusion-6 or -7 is like buying two kilns instead of one. Not only can you fuse and slump glass, but with the bead door you can also anneal glass beads. Comes complete with bead mandrel holder.

Note: The kiln may fire a little slower when equipped with the bead door.

$56.10

PY-71 Thermocouple with Lead Wires and Plug

Thermocouple, K-type, with 5’ lead wires for the DT2-7 pyrometer. 4 1/4” long thermocouple fits into a 1/4” wide hole. Thermocouple flat-pin mini connector fits many meters such as the Fluke 53/54 IIB.

$34.68

T-2 Pyrometer

Pyrometer, needle indicator, 2200 degrees F maximum temperature. Includes a K-type thermocouple.

$192.78

STD18

18" wide x 12 1/4" tall deluxe stand with casters. Conveniently move your kiln out of the way when not in use. Heavy-duty stands remain rock-steady with power pressed steel frame and reinforced legs. 2" smooth rolling steel casters included. Shipped fully assembled. Shipping dimensions: 18" wide x 12" deep x 24" high.

$140.35

Firing Safety Glasses

Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.

Paragon no longer sells firing safety glasses. Instead, you can order them directly from Amazon. We recommend green #3 lenses.

Click here to order glasses from Amazon.com

$0.00



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"