HW7 fall away Prop-R-Vent kit for top-loading kilns.
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
MS6 Element Connectors
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
PL2 Peephole Plug Cone Shaped
TF5 Half Amp Fuse
TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).
PLASTIC FEET FOR KILN STAND
Kiln stand for 6-, 7-, and 8-sided kilns. 9" tall. Assembly required. (This stand is furnished with a new kiln.)
RELAY 30 AMP, 120 VOLT COIL
PILOT LIGHT with push-on terminals.
KN4 Knob for Stepless Control
KN4 Knob for Stepless Control Switch, with printed numbers.
MS1 Porcelain Insulators
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
BOTTOM PAN FOR 7 SIDED KILNS
STRAIGHT, 2 GROOVE BRICK, 7 SIDE, 2.5" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
TERMINAL 2 GROOVE BRICK, 7 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
BRICK BOTTOM FOR 66B, 66B3
LID FOR 66B, 66SB, 77B. The lid comes with a band, but it does not include hardware such as the hinge and handle.
CORDSET, 20 AMP, 120 VOLT, NEMA 5-20, 6 FOOT
ELEMENT 14-9, 120 VOLTS, 12 OHMS, 2 PER KILN
The element comes pre-stretched and bent at the wallbrick corners for a precise fit. Element connectors are included with each new element.
HW4 Small Lid Handle
Lid handle for small kilns, 8 sides or less.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"