Lid and side handles for large kilns, 10 sides and more.
Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
HW7 fall away Prop-R-Vent kit for top-loading kilns.
Insert the cone supports into the slots in the Kiln Sitter porcelain tube. Package of 2.
KN7 Knob with Pointer (for S and SnF series Paragon kilns)
KS7 Dawson Kiln Sitter or Orton Auto-Cone Tube Assembly for the Paragon S and SnF series kilns. The replacement tube assembly may not look exactly the same as the original, because we have changed manufacturers. Do not be concerned; the tube assembly will still fit.
PL2 Peephole Plug Cone Shaped
Release Claw for the Dawson Kiln Sitter and the Orton Auto-Cone. Fits all sensing rods. Instructions included.
MS6 Element Connectors (2 per package). Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)
Motor for the Limit Timer on the Dawson Kiln Sitter and the Orton Auto-Cone. 208 - 240 volt, 60 hertz.
PILOT LIGHT with push-on terminals.
PLASTIC FEET FOR KILN STAND
ST5 Kiln Stand for 10 and 12 Sided Kilns
Kiln stand, 24” square x 9” tall, for 10- and 12-sided models. The stand is furnished with new kilns and comes with mar-proof plastic feet. Assembly required.
STEPLESS CONTROL SWITCH 240 VOLTS
(Note: If you are replacing a Duncan KM300 switch with the SW-6, the switch must be installed upside-down. --Thank you)
LIMIT TIMER KILN SITTER
MS1 Porcelain Insulators, 1 1/8" long (4 per package). The insulators prevent the element from touching the kiln case.
BOTTOM PAN FOR 12 SIDED KILNS
STRAIGHT, 2 GROOVE BRICK, 12 SIDE, 3" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
TERMINAL 2 GROOVE BRICK, 12 SIDE, 3" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
PLAIN, NO GROOVE HALF BRICK, 12 SIDE, 3" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.
BRICK BOTTOM FOR 28B-3
LID FOR 28B3. The lid comes with a band, but it does not include hardware such as the hinge and handle. Shipping dimensions: 46" w x 43" d x 17"h
CORDSET, 50 AMP, 240 VOLT, NEMA 6-50, 6 FOOT
ELEMENT S283, TOP, BOT, MID, 240 VOLTS, 7.6 OHMS, 6 PER KILN
The element comes pre-stretched and bent at the wallbrick corners for a precise fit. Element connectors are included with each new element.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Copyright © 2018,Paragon Industries, L.P.
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,dentistry, laboratory, and glass fusing.Better Designed Kilns from Paragon Industries!"