Paragon Kiln Products, Parts & Accessories
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

Options For Kiln: S283, Discontinued

Name

Description

Quantity

Price

DT2-7 Digital Hand-Held Pyrometer, Degrees F

(sku: DT2-7)

Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Monitor electric pottery firings up to cone 10.

The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 2372F. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F.

The DT2-7 comes with a thermocouple, thermocouple wire, 9 volt battery, carrying case, wall mount screws, stand, and printed instructions. Prop the meter on the metal stand for easy viewing.

The DT2-7 is easy to use. Turn on the switch and insert the thermocouple into the kiln. The DT2-7 is easier to read than analog (needle-indicator) meters.

DT2-7 SPECIFICATIONS

  • Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
  • 1/2” liquid crystal display digits
  • Low power consumption
  • Measurement range: -50F – 2372F
  • Environmental operating temperature: 32F – 122F
  • Degrees F display
  • Type-K thermocouple with 5’ of wire
  • Requires 9 volt DC battery
  • Battery life: 150 – 200 hours of continuous use
  • Low battery indicator message
  • Weight: 5 oz.
  • Warranty: 90 days
  • Replacement thermocouple: PY-71

$106.03

PY-71 Thermocouple with Lead Wires and Plug

(sku: PY71)

Thermocouple, K-type, with 5’ lead wires for the DT2-7 pyrometer. 4 1/4” long thermocouple fits into a 1/4” wide hole. Thermocouple flat-pin mini connector fits many meters such as the Fluke 53/54 IIB.

$36.07

KS-4 Kiln Sitter Firing Gauge

(sku: KS-4)

Periodically check the adjustment of your Kiln Sitter. It takes only a moment. Use of the firing gauge is essential to the successful operation of the Kiln Sitter.

$10.50

Lid Safety Switch

(sku: Lid Safety Switch)

The optional lid safety switch turns off power to the heating elements when the lid is raised. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid. IMPORTANT: The lid safety switch is required in some areas such as Canada and Europe.

$83.80

DT2-9 Digital Hand-Held Pyrometer, Degrees C

(sku: DT2-9)

Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln.

The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees C up to 1287C. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 0 – 50 degrees C.

DT2-9 SPECIFICATIONS

  • Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
  • 1/2” liquid crystal display digits
  • Low power consumption
  • Measurement range: 1287C
  • Environmental operating temperature: 0C – 50C
  • Degrees C display
  • Type-K thermocouple with 5’ of wire
  • Requires 9 volt DC battery
  • Battery life: 150 – 200 hours of continuous use
  • Low battery indicator message
  • Weight: 5 oz.
  • Warranty: 90 days
  • Cost of replacement thermocouple: $26.00

$105.02

Turquoise Paint

(sku: Turquoise Paint)

At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Hot Pink Paint

(sku: Hot Pink Paint)

At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Purple Paint

(sku: Purple Paint)

At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Berry Paint

(sku: Berry Paint)

At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Navy Paint

(sku: Navy Paint)

At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Jade Paint

(sku: Jade Paint)

At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may not be the model you are ordering. We have included the photo only to show the color.)

$0.00

Black Paint

(sku: Black Paint)

At no extra charge, you can order your Paragon kiln in striking black instead of the standard blue.

$0.00

FSA28B3 Furniture Kit

(sku: FSA28B3)

Recommended furniture kit for the Paragon S-28-3, SnF-28-3, TnF-28-3, Viking-28, and equivalent sized kilns. Included:

8 C-24H 1/2 Shelves (26” round x 3/4” half)

1” wide Square Posts, 8 of each - 1”, 2”, 3”, 4”, 5”, 6” lengths

1 lb. Bag Kiln Wash

Shipping size: 30” long x 13” wide x 22” high

Ware is fired on shelves that are separated by posts so you can fire multiple layers of ware in your kiln. Coat the shelves with kiln wash, which prevents glaze or glass from sticking to the shelves.

Paragon’s durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents of this shelf kit.)

$757.41

T-2 Pyrometer

(sku: T2)

Pyrometer, needle indicator, 2200 degrees F maximum temperature. Includes a K-type thermocouple.

$200.49

VENTMAST120, Not Installed

(sku: VENTMAST120)

KILNVENT MASTER 120V M9 VENT MASTER (Installed after the kiln is set up)

The patented Orton Vent Master not only vents fumes but also improves firing results.

It pulls fresh oxygen into the kiln for brighter colors, especially noticeable with red and orange glazes and decals. Fire red and green glazes in the same load without glaze contamination. The Vent Master draws air from the kiln, dilutes it with room air, and pushes it outdoors through a vent hose.

The extra oxygen and increased air movement help burn carbon out of the clay, which helps eliminate a host of firing problems: bloating, dark patches in the clay, porcelain mildew, pinholes, pitting, blisters, and bubbles.

The Vent Master removes fumes containing volatile metals, fluorides and sulphur oxides. You can fire even lusters, decals, metallics, and pate-de-verre glass without strong odor.

The flow of fresh air helps even out the temperature throughout the kiln. The vent also extends the life of the Kiln Sitter tube assembly, since fumes by-pass the tube. You will enjoy the convenience of the Vent Master. Throughout the firing, keep the lid closed and peephole plugs inserted. You no longer need to remember to lower the hot lid from vented position.

The Vent Master increases firing time by about five minutes for firings up to cone 4; 12 minutes for firings from cone 4 to 10. It has little effect on maximum temperature. At 132 watts, electrical consumption of the Vent Master motor is only pennies per firing.

From the shut-off temperature down to 1000°F, the Vent Master has little effect on cooling time. From 1000°F to room temperature, it reduces cooling time by about two hours.

As with Paragon kilns, the Orton Vent Master can be made for any electrical system in the world. Approved for use in the 1992 Uniform Mechanical Code. UL/CSA approved for UL Listed kilns. ETL Listed, CE Certified. Two year limited warranty.

Order a kiln with the Vent Master and we will drill all necessary holes at no extra charge. (Please note: kilns in stock will not be uncrated to drill the holes.) The holes are only ¼”.

The Vent Master requires a separate 120 volt wall plug unless your kiln is equipped with the AOP vent.

A 3’ long 2” duct comes with each vent. The 2” duct runs between the collection cup and the blower motor. Use 4” aluminum dryer duct or 4” PVC pipe between the motor and the vent outlet. (Do not use vinyl dryer duct.)

Position the Vent Master next to the kiln and attach the collection cup to the bottom or side of the kiln. The collection cup fits under most top-loading kilns. (Note: The kiln stand must be at least 5” high to accommodate the collection cup.) Since the vent motor is away from the kiln, there is no vibration in the kiln, the motor is kept away from the heat of the kiln, and the fan is easy to clean. The Vent Master works with all Paragon kilns except the smallest tabletop models. The Vent Master can vent two kilns. For the second kiln, order the Vent Master Expansion Kit.

Shipping dimensions: 15" wide x 10" deep x 12" high.

$565.41

FSTILE

(sku: FSTILE)

6" tile holder saves space, allows air to circulate around tiles for even heating. Reduces warping. Holds tile without touching the glazed surface. Holds 9 6" x 6" tiles. Exterior: 7 1/2"W x 10"H x 6 1/4"D.

$56.22

Firing Safety Glasses

(sku: Firing Safety Glasses)

Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.

Paragon no longer sells firing safety glasses. Instead, you can order them directly from Amazon. We recommend green #3 lenses.

Click here to order glasses from Amazon.com

$0.00



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"