Xpress-66-3 Kiln is a kiln used for Ceramics, Clay,China Painting. Better Designed Kilns From Paragon.

Kilns and Furnaces for ceramics, pottery, heat treating, enameling, dentistry, laboratory testing and glass fusing. Better Designed Kilns!

SEARCH:

Xpress-66-3

China Painting Crystalline Glazes Decals Dolls Low-Fire Ceramics

Product Videos

Watch & Listen to D002 Sentry Xpress Cone-Fire Demonstration (3 min)

Watch & Listen to D001 Sentry Xpress Ramp-Hold Demonstration (7 min)

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P003 The Paragon Kiln Factory Round Kiln Assembly Line (6 min 50 sec)

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P009 Paragon’s Sentry Xpress 3-Key Ceramics Controller (2 min 51 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Watch & Listen to Interactive Sentry Xpress 3-key Controller Demo

Features

Paragon Xpress-66-3

The 7-sided digital Xpress-66 is the ideal size for dolls, jewelry, and china, yet still large enough for most ceramic projects. Imagine the stunning ware that you could make in this kiln.

The heat of the kiln is magical and offers wonderful surprises. Ceramic glazes undergo a complete transformation in the kiln. Opening a kiln to view your treasures is a festive moment that you will never outgrow.

With its 3” firebrick walls, it can fire up to cone 6. A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are seated in dropped, recessed brick grooves. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. A switch on the front panel turns off power to the controller when the kiln is not in use. The controller is mounted near the top of the switch box for easy access.

The kiln features a top row of 2” high blank wall bricks. Since the brick is without element grooves, it is less susceptible to damage during loading than a grooved brick. The peepholes, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.

A kiln stand is included at no extra charge. The stand is complete with mar-proof plastic feet and tall enough to accommodate the optional Orton Vent Master.

The Xpress-66-3 is proudly made in America to exacting standards. It has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

Features of the Xpress-66

Lock-in lid support with a positive catch
Two wide-view tapered peepholes
Ventilated, louvered switch box
Two hand lifts
3” firebrick walls
Sentry Xpress digital controller made by Orton Ceramic Foundation
Heavy duty kiln stand with mar-proof plastic feet
Full-formed, galvanized steel base
Fall-away two stage Prop-R-Vent
Coated lid, peepholes and top rim of firebricks
Heavy gauge stainless steel case
Reversible brick bottom
Dropped, recessed brick grooves eliminate element pins

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry Xpress controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.

The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Features of the Sentry Xpress 3-key Controller for Ceramic Kilns

Fire to a pyrometric cone by merely entering cone number and slow, medium or fast speed.

Program Review lets you check the program you are about to fire.

Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Set the alarm to remind yourself to close a vented lid.

Design Ramp-Hold programs with up to 8 segments (steps).

Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.

Hold (soak) the temperature in both Cone-Fire and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.

Control both heating and cooling in Ramp-Hold.

Add Hold Time during firing without having to stop the kiln to reprogram.

Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.

Temperature display throughout firing and cooling in your choice of °F or °C

Thermocouple Offset adjusts the thermocouple readout.

Set the Delay to turn on the kiln later to suit your schedule.

Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.

12 Month Warranty

LED Lights show whether you are in program, review, or firing mode.

Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

The Furniture Kit

The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.

Furniture Kit for S-66-3, SnF-66-3, Xpress-66-3

2 C-14 Shelves (12” round x 5/8”), 1 C-14H 1/2 Shelf

1" wide Square Posts, 3 each of - 1/2”, 1”, 2”, 3”, 4”, 6” lengths

1 lb. Bag Kiln Wash

Furniture Kit Shipping Weight: 20 lbs.

Specifications

Max. Temperature	2300F 1259C
Amps	15
Phase	1
Watts	3600
Nema	6-20P
Breaker Size	20
Circuit Wire Size	12 gauge
TUV tested to CSA and UL Standard 499	Y
CE	N
Control Type	Sentry Digital 3-key Ceramics
Voltage	240
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Sides	7
Chamber Volume	1.22 CU.FT. 34.55 litres
Chamber Diameter	13.50 343 mm
Chamber Depth	13.25 337 mm
Outer Size	22.00W x 25.50D x 28.00H Inches 559W x 648D x 711H mm
Ship Size	28.50W x 28.50D x 27.00H Inches 724W x 724D x 686H mm
Ship Weight	147.00 Lbs. 66.68 Kg.
Ship Method & Notations	This Kiln Ships Via Truck


Part Number	Xpress-66-3 * Base Model
Price	$1,030.00
Quantity

Options
	Part Number	Description	Quantity	Price
	FSA66B3	Recommended furniture kit for the A66B3 and equivalent sized kilns. Paragon's durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents		$86.00
	VENTMAST120, Not Installed	KILNVENT MASTER 120V M9 VENT MASTER (Installed after the kiln is set up) The patented Orton Vent Master not only vents fumes but also improves firing results. It pulls fresh oxygen into the kiln for brighter colors, especially notice		$440.00
	TF61	AUXILLARY OUTPUT FOR SENTRY II CONTROLLERS (VENT CONTROL) The AOP (Auxiliary Output) is an electrical outlet mounted to the kiln. Plug either a downdraft vent or an external alarm into the AOP. Control the vent with Cone-Fire or Ramp-Hold modes.		$95.00
	TF62	RS232 PORT ON SENTRY II CONTROLLERS (PC CONTROL) The RS232 is a computer port mounted to the kiln. You can monitor the kiln from a computer and store a record of each firing on your hard drive. Print graphs of firings.		$360.00
	STD18	18" deluxe stand with casters. Conveniently move your kiln out of the way when not in use. Heavy-duty stands remain rock-steady with power pressed steel frame and reinforced legs. 2" smooth rolling steel casters included. Quick assembly.		$100.00
	PY-55	Optional Type-S premium-grade thermocouple for 2 1/2" - 3" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures. Note: Select the correct thermocouple type under Options on your Sentry controller.		$195.00
	PT-2	Ceramic protection Tube for S-type thermocouple, 2 1/2" - 3" wall kilns.		$19.00
	FSTILE	6" tile holder saves space, allows air to circulate around tiles for even heating. Reduces warping. Holds tile without touching the glazed surface. Holds 9 6" x 6" tiles. Exterior: 7 1/2"W x 10"H x 6 1/4"D.		$43.00
	Firing Safety Glasses	Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.		$19.50
	Lid Safety Switch	The optional lid safety switch turns off power to the heating elements when the lid is raised. It mounts to the back of the lid. IMPORTANT: The lid safety switch is required in some areas such as Canada and Europe.		$70.00