TNFE14 Kiln is a kiln used for China Painting,Enameling,Glass. Better Designed Kilns From Paragon.

Kilns and Furnaces for ceramics, pottery, heat treating, enameling, dentistry, laboratory testing and glass fusing. Better Designed Kilns!

SEARCH:

TNFE14

China Painting Decals Enameling Lost Wax Casting Low-Fire Ceramics

Product Videos

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Watch & Listen to Interactive Sentry 2.0 12-key Controller Demo

Features

Paragon TnF-E-14A

The TnF-E-14A fires to 2000°F- ideal for enameling, china painting, glass art, silver clay and jewelry. This digital kiln comes with the Sentry 12-key controller. The kiln includes a vent hole with cover in the top.

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.

The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

The TnF-E-14A heating elements, exposed in dropped, recessed insulating firebrick grooves, are easy to replace. They need no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

The TnF-E-14A includes a door vent hole with steel cover.

Specifications

Max. Temperature	2000F 1093C
Amps	13
Phase	1
Watts	3120
Nema	6-20P
Breaker Size	20
Circuit Wire Size	12 gauge
TUV tested to CSA and UL Standard 499	Y
CE	N
Control Type	Sentry Digital 12-key Non-Ceramic
Voltage	240
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Sides	4
Chamber Volume	0.89 CU.FT. 25.20 litres
Chamber Width	13.00 330 mm
Chamber Depth	13.50 343 mm
Chamber Height	8.75 222 mm
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size	18.25W x 22.50D x 20.50H Inches 464W x 572D x 521H mm
Ship Size	32.00W x 24.00D x 26.50H Inches 813W x 610D x 673H mm
Ship Weight	131.00 Lbs. 59.42 Kg.
Ship Method & Notations	This Kiln Ships Via Truck


Part Number	TNFE14 * Base Model
Price	$1,490.00
Quantity

Options
	Part Number	Description	Quantity	Price
	ST8 Kiln Stand	The heavy-duty ST8 stand raises your kiln to a convenient 28" height. Begin operating your new kiln without having to find a table strong enough to support it. The table is 147 pounds of rock-solid construction. Ships fully assembled. 30 1/4" square		$380.00
	TF62	RS232 PORT ON SENTRY II CONTROLLERS (PC CONTROL) The RS232 is a computer port mounted to the kiln. You can monitor the kiln from a computer and store a record of each firing on your hard drive. Print graphs of firings.		$360.00
	Firing Safety Glasses	Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.		$19.50
	Door Safety Switch	The optional door safety switch turns off power to the heating elements when the door is opened. It mounts to the top of the door hinge shaft. IMPORTANT: The door safety switch is required in some areas such as Canada and Europe.		$70.00
	2 inch x 2 inch Glass Window, E Series Style	Watch the bright red kiln interior through the optional 2” x 2” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) The glass window is guaranteed up to 2300°F.		$60.00
	E-Series Bead Door	Adding the optional 2 1/2” x 6 1/2” bead door to your E-series is like buying two kilns instead of one. Not only can you fire enameling, glass, and ceramics, but with the bead door you can also anneal glass beads. Imagine the fun that this will ad		$50.00