Q11A Kiln is a kiln used for Ceramic,China Painting,Enameling,Pottery. Better Designed Kilns From Paragon.

Kilns and Furnaces for ceramics, pottery, heat treating, enameling, dentistry, laboratory testing and glass fusing. Better Designed Kilns!

SEARCH:

Q11A

China Painting Decals Dolls Enameling Fast Firings Glass Fusing Low-Fire Ceramics Porcelain and Stoneware Silver Clay

Product Videos

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Features

Paragon Q-11-A

The Q-11A fires rapidly to 2350F. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: enameling, china painting, glass, lost wax casting, ceramics, stoneware, and porcelain. Since the kiln opens from the front instead of the top, it is ideal for copper enameling.

Dorothy Trent in Chandler, Arizona said, “I am 70 years old. I have quite a few china painter friends and have been teaching a long time. Every single one of my students and friends has a Paragon Q-11A. I always let my gals see how wonderful that kiln is. You can plug it in anywhere and fire it quickly.”

The Q-11A comes with an infinite control switch, safety pilot light, and pyrometer (temperature sensor). The pyrometer simplifies kiln operation. It shows you what is happening inside the kiln and helps you to become comfortable with firing. By watching the pyrometer and adjusting the switch, you can even hold (soak) the temperature.

The switch, pilot light, and pyrometer are mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation.

A 1/2” hole is stamped into the steel door case and includes a brushed stainless steel cover. We have left the firebrick behind the hole undrilled so that you can drill it to the exact size that you need for a peephole, vent hole, or extra pyrometer hole. (Most people do not need the hole and leave the firebrick undrilled.)

Adjust the firing speed with the infinite control switch. It cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each cycle. When the switch is turned to High, the elements stay on continuously. (Note: The switch does not automatically hold a temperature. It requires small adjustments to maintain a temperature hold.)

The Q-11A heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.)

Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.

Imagine the glass you could sag, slump, and fuse with this kiln. Make pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment.

Becky Johnson, a glass teacher in Dallas, Texas, describes opening the kiln: “I like to open the kiln with my students so that we can review and admire each other’s treasures together. The transformation of the glass inside the kiln is magical and mystical. It changes from pieces of arranged cut glass to awe-inspiring art. To be some part of that process is a true gift.”

“Paragon kilns just go on working forever,” said Jeff Zamek, author of “What Every Potter Should Know.” He added, “Paragon kilns have one of the lowest incidences of repair of any kiln manufactured in the U.S.”

The Furniture Kit

The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.

Q-11A, Xpress-Q-11-A & TnF-Q-11 Furniture Kit

1 C-2 (5” x 5” x 3/8”) Shelf

4 - 2” long 1" wide Square Posts

1 lb. Bag Kiln Wash

Shipping Weight: 2 lbs.

Specifications

Max. Temperature	2350F 1287C
Amps	12
Phase	1
Watts	1440
Nema	5-15P
Breaker Size	15
Circuit Wire Size	14 gauge
TUV tested to CSA and UL Standard 499	Y
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Infinite Control Switch
Voltage	120
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type

Front Loading Square

Sides

Understanding Chamber Measurements

Chamber Volume

0.14 CU.FT.
3.96 litres

Chamber Width

6.00 IN
152 mm

Chamber Depth

6.00 IN
152 mm

Chamber Height

6.25 IN
159 mm

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

11.00W x 15.00D x 18.00H Inches
279W x 381D x 457H mm

Ship Size

21.50W x 19.00D x 16.50H Inches
546W x 483D x 419H mm

Ship Weight

43.00 Lbs.
19.50 Kg.

Ship Method & Notations

This Kiln Ships Via UPS

Part Number

Q11A * Base Model

Price

$535.00

Quantity

Find A Local Paragon Seller

Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

Find A Local Seller Now!

Options
	Part Number	Description	Quantity	Price
	Purple paint	You can order SC-series, E-series, Q-series, and BlueBird kilns in purple instead of the standard blue. (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown here also may not be the model you are ord		$50.00
	Hot pink paint	You can order SC-series, E-series, Q-series, and BlueBird kilns in hot pink instead of the standard blue. (The exact shade may not match the color shown on your computer monitor. The hot pink kiln shown here also may not be the model you are ordering		$50.00
	Black paint	You can order SC-series, E-series, Q-series, and BlueBird kilns in black instead of the standard blue paint. (The exact shade of black may not match the color shown on your computer monitor. The black kiln shown here also may not be the model you are		$50.00
	1 inch x 3 inch Glass Window, E Series Style	Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) The glass window is guaranteed up to 2300°F.		$60.00
	Turquoise Paint	You can order SC-series, E-series, Q-series, and BlueBird kilns in turquoise instead of the standard blue. (The exact shade may not match the color shown on your computer monitor. The turquoise kiln shown here also may not be the model you are orderi		$50.00
	FSQ11	Recommended furniture kit for the Paragon Q-11A, Xpress-Q-11A, and equivalent sized kilns. Included: 1 C-2 Shelf (5” square x 3/8”) 4 – 2” long		$20.00
	Doll Video	90 minute VHS tape packed with tips on pouring, cleaning and firing porcelain dolls. Plastic library case.		$20.00
	Firing Safety Glasses	Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see. Paragon no longer sells firing safety glasses. Instead, y		$0.00
	DT2-7 Digital Hand-Held Pyrometer, Degrees F	Enjoy digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$84.00
	Door Safety Switch	The optional door safety switch turns off power to the heating elements when the door is opened. The controller remains powered. The switch turns the power to the elements back on when the door is closed. The switch mounts to the top of the door hing		$70.00
	DT2-9 Digital Hand-Held Pyrometer, Degrees C	Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$84.00