Paragon Industries

2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328

Product: Ovation-22 Oval Kiln Kiln, Model/SKU: 9461111AGP, Price: $3,851.95

Ovation-22 Oval Kiln

Decals    Low-Fire Ceramics    Porcelain and Stoneware   


Features

  • Feature: frequency of use does not affect warranty
  • Feature: Optional color at no extra charge
  • The Ovation-22 Pottery Kiln

    Production Loads

    If you have been firing a smaller kiln, you will be amazed at the space inside the Ovation-22. Fire large projects such as bowls or platters. Imagine how many mugs you could fire in the Ovation-22. As you can see, a few production loads can pay for this kiln.

    Paragon’s warranty is not affected by frequency of use, of course. Fire your new kiln as often as you want, even in commercial or school settings. Frequency of use will have no effect on the warranty.

    Spring-Assisted Lid

    Patented dual spring-assisted lid lifters transfer the weight of the lid to a massive hinge assembly on the back of the kiln. This reduces the stress on the rear kiln wall to give your kiln the long life that Paragon kilns are famous for. The truss and floating lid system allow for expansion of the lid. Ask competitors if their lid spring system includes a floating lid.

    Mercury Relays are standard

    You will be glad mercury relays are standard on this kiln especially when you are working under a deadline and need a reliable kiln. The mercury relays found on our large industrial kilns outlast mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.

    Easy Maintenance

    The patented, control box on the Ovation-22 opens forward for easy maintenance. The box is hinged at the bottom. A folding support arm holds the box in the open position for your convenience. The control box is finished in durable high temperature, blue water-base paint. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

    Quality Components

    A heavy galvanized steel base completely covers the reversible brick bottom. Tabs on the steel base fold up inside the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

    Two kiln stands are included with your Ovation-22. The stands are complete with mar-proof plastic feet and tall enough to accommodate the optional Orton Vent Master under the kiln.

    Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Crimpless element connectors are easy to install and are included with replacement elements.

    Made in America

    And, of course, the Paragon Ovation-22 is made in the U.S. by skilled workers. Many of them have been with Paragon for over a decade. Our master kiln builders have been here even longer.

    Digital temperature accuracy

    The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and the fully customizable Ramp-Hold. It is manufactured by the Orton Ceramic Foundation for Paragon.

    You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean. The controller is mounted near the top of the switch box for easy operation. For your convenience, operating instructions are silk-screened onto the switch box.

    The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

    Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

    Precision thermocouple

    The thermocouple senses temperature inside the kiln. It is the small rod that extends into the side of the firing chamber. The Ovation-22 comes with a thermocouple made with special-limit wire for superior accuracy. The new and improved thermocouple replaces our earlier sheathed thermocouple. The new thermocouple is made in America to our exacting standards.

    240 or 208 volts

    Most of Paragon’s standard 240 volt kilns can be ordered in 208 volts. To compensate for the lower voltage, Paragon’s 208 volt kilns use a different set of elements so they will perform as well as the equivalent 240 volt models. For this reason, the elements in 240 and 208 volt kilns, even for the same kiln model, are not interchangeable. So please be sure to specify the correct voltage when you order your kiln. By using different elements for different voltages, total watts consumed by different kiln versions remain the same. 240 and 208 kilns of the same model have the same maximum temperature rating.

    • Glass/pottery selection switch
    • Mercury relays
    • 3” insulating refractory firebrick firing chamber
    • Sidewall elements in dropped, recessed brick grooves are easy to replace.
    • Two tapered peepholes for a wide view with little heat loss
    • A steel floor pan supports the entire brick bottom of each kiln.
    • One year limited warranty
    • Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
    • Easy-access, hinged control box with folding support arm.
    • Since the Ovation-22 is designed for porcelain, it also easily fires ceramics, china paint, decals, and gold.
    • Heavy gauge stainless steel case
    • Coated lid, peepholes and rim of firebricks

    Specifications

    Max. Temperature

    2350F
    1287C

    Amps

    67

    Phase

    1

    Watts

    16000

    Nema

    Direct

    Breaker Size

    75

    Circuit Wire Size

    4 gauge

    UL

    N

    CE

    N

    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

    Control Type

    Sentry Digital 12-key Ceramics

    Voltage

    240

    Hertz

    60

    Kiln Type

    Top Loading Square

    Sides

    4

    Understanding Chamber Measurements

    Chamber Volume

    11.40 CU.FT.
    322.81 litres

    Chamber Length

    41.50 IN
    1054 mm

    Chamber Width

    22.50 IN
    572 mm

    Chamber Depth

    22.50 IN
    572 mm


    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    57.00W x 39.00D x 44.50H Inches
    1448W x 991D x 1130H mm

    Ship Size

    57.00W x 47.00D x 50.00H Inches
    1448W x 1194D x 1270H mm

    Ship Weight

    630.00 Lbs.
    285.77 Kg.

    Ship Method & Notations

    This Kiln Ships Via Truck





    Part Number

    9461111AGP   * Base Model

    Price

    $3,851.95

    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

    Usages

  • Ceramic Kilns
  • Pottery Kilns
  • Other Phases and Voltages

    Part Number

    Phase

    Voltage

    Price

    9461111AGP*

    1

    240

    $3,851.95

    Legend: * = Base Model

    Copyright © 2018, Paragon Industries, L.P.