Paragon Industries

2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328

Product: PAF10-1 Kiln, Model/SKU: , Price: $11,138.40

PAF10-1

Glass Annealing   


Features

  • Feature: frequency of use does not affect warranty
  • Feature: Optional color at no extra charge
  • Expand the production capacity of your glass studio with the massive 16-cubic-foot PAF10-1 glass annealing kiln. Make glass vases, bowls, and figurines without worrying about having enough annealing capacity.

    The PAF10-1 is designed for annealing, so the maximum temperature is 1100°F (593°C). With this kiln, you are buying only the heating capacity that you need for annealing.

    The PAF10-1 is stackable. As your business grows, add another PAF10-1 without using more floor space. The feet of the top kiln fit into the four stacking points of the bottom kiln. Level the kiln in minutes with levelers that are built into the feet.

    Spring-loaded quick-release door latches allow one-handed loading into the hot kiln. The doors open smoothly on heavy-duty 3/4” hinge shafts. The firing chamber opening is lined on all four sides with a fiber rope door seal. The doors also each have a seal where the doors meet in the center. Each door has a safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the doors.

    You will enjoy the convenience of digital firing. The solid state Sentry Xpress controller continually monitors the firing so you can spend your time productively without closely watching the kiln. The sealed touch pad keeps out dust and is easy to wipe clean.

    The kiln heats from the sides and back. Dropped, recessed brick grooves protect the elements for long life. The kiln is heavily insulated for economical operation. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling:

  • 4” thick ceramic fiberboard top
  • 3” thick doors: 3” ceramic fiberboard
  • 4” thick walls: 1” ceramic fiberboard and 3” firebricks
  • 3” thick firebrick bottom

    A mercury relay is standard on this kiln. The relay sends power to the elements on command from the digital controller. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.

    Paragon’s PAF10-1 is made for years of rigorous firing with a heavy 2” tubular steel frame. A heat shield and 1 3/4” air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel.

    The PAF10-1 has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

    There is no extra charge for crating. Inquire about the crating cost of a competitive kiln when figuring prices. Most Paragon round and square kilns are packed in wooden crates at no extra charge.

    The PAT30-1 is proudly made in America by skilled craftsmen.

  • Specifications

    Max. Temperature

    1100F
    593C

    Amps

    48

    Phase

    1

    Watts

    11500

    Nema

    6-50R

    Breaker Size

    50

    Circuit Wire Size

    6 gauge

    UL

    N

    CE

    N

    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

    Control Type

    Sentry Xpress 4.0 Digital 3-Key

    Voltage

    240

    Hertz

    60

    Kiln Type

    Front Loading Square

    Sides

    4

    Understanding Chamber Measurements

    Chamber Volume

    16.00 CU.FT.
    453.07 litres

    Chamber Width

    35.50 IN
    902 mm

    Chamber Depth

    29.00 IN
    737 mm

    Chamber Height

    27.00 IN
    686 mm


    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    56.00W x 46.00D x 45.00H Inches
    1422W x 1168D x 1143H mm

    Ship Size

    58.00W x 50.00D x 51.00H Inches
    1473W x 1270D x 1295H mm

    Ship Weight

    757.00 Lbs.
    343.38 Kg.

    Ship Method & Notations

    This Kiln Ships Via Truck





    Part Number

       * Base Model

    Price

    $11,138.40

    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

    Usages

  • Glass Kilns
  • Other Phases and Voltages

    Part Number

    Phase

    Voltage

    Price

    *

    1

    240

    $11,138.40

    Legend: * = Base Model

    Copyright © 2018, Paragon Industries, L.P.