Paragon Industries

2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328

Product: GL24ADTSD, Old Style Kiln, Model/SKU: 3832234AGD, Price: $0.00

GL24ADTSD, Old Style

Glass Fusing    Glass Painting    Glass Slumping   


Features

Paragon Old-Style GL-24ADTSD Glass Fusing Kiln

This model has been replaced by the Professional Series GL-24ADTSD. Though the earlier model is no longer in production, you can still access the wiring diagram, replacement parts, and instruction manuals by scrolling down to the bottom of this page.

The GL-24A digital kiln heats from the top, three sides and door for unsurpassed heat distribution. It is 15” high inside with room to bend glass for curved windows or cabinet doors and to repair lamp shades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface.

Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-guage steel, soak up heat for slow, even cooling.

The GL-series lid elements in the 240 volt version of the GL-24ADTSD use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.

The spring-pressure latch and a ½" recess around the edge of the firebrick door seal the door tight. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.

Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included.

Optional Ceramic Fiber Top

The standard GL-series kiln comes with an insulating firebrick top, grooved for heating elements. The upgrade option is a ceramic fiber top with embedded heating elements. The new top helps keep the glass clean during firing. (It is available only for the GL-24 size kilns.)

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.

The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

Top, Side & Door Elements

Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements, seated in dropped, recessed brick grooves, span the three walls in six horizontal rows:

The kiln’s door elements offer unsurpassed heat distribution for difficult pieces. (The door, with elements, is always hinged on the right side.)

The kiln uses infinite control switches to balance the heat between top and side/door elements. Kilns with side/door elements are equipped with a door safety switch. When the door opens, the switch shuts off the elements while leaving the temperature controller on.

Optional Kiln Stand

The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.

ST-8: without casters—30 ¼” square x 28 ¼” high, 147 lb.

ST-8-1: with 2" steel casters—30 ¼" square x 30 ¾” high, 150 lb.

Furniture Kit for GL-24 Series

The glass must always be fired on a kiln shelf rather than directly on the kiln’s firebrick bottom.

1 - C-30 - 22” Square Shelf

4 - 1” wide Square Posts, ½” long

1 lb. Bag Glass Separator

Specifications

Max. Temperature

1700F
926C

Amps

55

Phase

1

Watts

10900

Nema

DIRECT

Breaker Size

60

Circuit Wire Size

6 gauge

UL

N

CE

N

IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

Control Type

Sentry Digital 12-key Non-Ceramic

Voltage

200

Hertz

50

Kiln Type

Front Loading Square

Sides

4

Understanding Chamber Measurements

Chamber Volume

4.68 CU.FT.
132.52 litres

Chamber Width

24.00 IN
610 mm

Chamber Depth

22.50 IN
572 mm

Chamber Height

15.00 IN
381 mm


The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

40.50W x 32.00D x 29.50H Inches
1029W x 813D x 749H mm

Ship Size

47.00W x 43.00D x 42.00H Inches
1194W x 1092D x 1067H mm

Ship Weight

425.00 Lbs.
192.78 Kg.

Ship Method & Notations

This Kiln Ships Via Truck





Part Number

3832234AGD   * Base Model

Price

$0.00

Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Usages

  • Discontinued Models
  • Other Phases and Voltages

    Part Number

    Phase

    Voltage

    Price

    GL24ADTSD*

    1

    240

    $0.00

    3832234AGD*

    1

    200

    $0.00

    3861234GFB*

    1

    240

    $0.00

    3861234GGD*

    1

    240

    $0.00

    S0756-2*

    1

    240

    $0.00

    Legend: * = Base Model

    Copyright © 2018, Paragon Industries, L.P.