Paragon KM-45T Knife Maker’s Heat Treating Furnace
Knives have been indispensable on long journeys and through difficult trials. Upon their return home, explorers, soldiers, medics and astronauts have numbered among their most priceless possessions their knives. When the owner touches his knife, memories awaken. Once again he hears the stories around the crackling campfire; he smells the pine needles in the wilderness. He remembers the lean-tos he fashioned with his knife; the kindling he made for a fire in a blowing snow-storm. His heart quickens as he sees scenes he shared with the knife.
Choose a side swing door or a drop door
You can order a Paragon knifemaking furnace with either a drop door or a side-swing door. (The photo above shows the traditional drop door. Scroll down to Options to see the side swing door.) The price of the furnace is the same with either door style.
The drop door opens downward with one-handed operation. A counter-weight handle holds the door securely closed. The door, whether drop or side-swing, is mounted on a heavy-duty 1/2” thick hinge shaft for smooth opening. Because of the rigid case and heavy hinge, the door is sturdy enough for years of faithful service.
Door safety switch
The door micro safety switch shuts off the power to the elements when the door is opened, yet the controller continues to give a temperature readout. The safety switch is standard on Paragon KM furnaces.
Choose from the optional paint colors
As shown in the photos, the standard knifemaking furnaces are painted a deep black, which would look perfect in your shop. You can choose a different paint color at no extra charge. (Choose from the paint colors listed below the furnace specifications. Scroll down.)
Test exotic heat treating formulas
When you own a Paragon KM-45T furnace, you can live the knife making adventure to the fullest. You will actually witness the birth of your knives, for the soul of the blade is born in the crucible of the furnace.
There are many reasons to own a furnace. For instance, you can test and refine heat treating formulas. Each time you alter the heat treatment, test how many times a new blade can cut hemp rope and 2x4s. Can the blade bend to 45° or even 90°? After you run the blade through the first tests, take it out into the real world on a camping trip and test it further.
The knife maker with a KM-series furnace can try exotic heat treating methods at his leisure. Does quenching in dry ice improve blade performance? What happens when 52100 ball bearing steel is triple-quenched? Does a one-day wait between each quench matter? After this treatment, will the blade bend to 90° without chipping?
With a Paragon furnace in your shop, all questions about heat treating formulas are settled. Heat treating is no longer only theory; it is no longer a mysterious, difficult step in making knives. You will master heat treating, and you will find out for yourself which heat treating formula works best for your knife designs. Testing and heat treating are at the heart of the knife making adventure. Here is where your confidence and joy as a knife maker deepens.
Experiment with differential hardening, an ancient bladesmith technique. Try out the newest tool steels. Are they really as good as the tried and true 52100, D2 and A2? Paragon’s knifemaking furnaces are now rated to 2350 degrees F, so you can heat treat as hot as you need to.
A message from Ed Fowler—explorer, author, and founder of High Endurance Performance Knife Association
“Paragon offered me no financial rewards or free equipment for this endorsement. I recommend Paragon furnaces only because they make an excellent, reliable product.
“I've made knives off and on since the sixth grade. I enjoy every second in the shop making knives. I used to harden and temper with a torch. As my skills increased, my testing of knives revealed the benefit of longer and more uniform soak times during the annealing and tempering cycles than were possible with a torch.
“I finally bought a Paragon furnace. It is extremely beneficial to bladesmithing, because it allows us to do things with our blades we couldn't do otherwise. If I had known how good they are, I would have bought one years before I did.
“You don't want to introduce any variables into your blades by accident, and temperature is one such variable. With a Paragon, you know exactly what causes what and why. My advice to beginning knifemakers is to use the best equipment you can as soon as you can add it to your shop. I wasted a lot of time and energy trying to make knives with less than the best equipment for the job. Invest in quality equipment, learn how to use it right, and use your time seeking the best knife you can make.
“Without my Paragon oven, I would have never made the discoveries about steel that I’ve made. I love my Paragon. That Paragon sure made a big difference in my knife making. Any experiment I want to run is right there. If I want to change a heat treatment, I know exactly how. With every knife, I learn more.
“Thermal cycles, commonly known as heat treating of blades, are the most significant single aspect contributing to the quality of a knifemaker’s blade. Knifemakers who wish to explore the absolute frontiers of the world of knives in search of the Excalibur of their dreams must have the ability to design thermal treatments specifically intended to push their steel to the highest limits of performance. Absolute control of the temperature of their blades is absolutely essential to success.
“Paragon makes a nice piece of equipment. I recommend it very highly to anyone who asks and to many people who don't ask. In order to make knives that my customers can depend upon, I have to be able to count on my equipment to provide consistent performance. My Paragon heat treating oven has always provided the degree of dependability I can count on to support my commitment to provide my customers the best functional knife possible.
“Believe me, I'm much richer knowing I'm making the best knife I can. I'm much happier with myself.”
A bond of trust between you and the knife owner
The knife maker’s credo is simple: to create a knife that represents the knife maker himself. For the knife maker, quality of work is a way of life. It is his or her passion. Anything less than one’s best is unthinkable.
The buyer of a custom knife appreciates fine detail. He or she marvels at the lines and curves the maker coaxed from the steel with such patience. There is a bond of trust between the owner of a fine knife and its maker. This is why the knife maker sleeps better when he or she controls every step in creating a knife.
The knife maker derives joy from creating knives that are not merely prized, but treasured. When the knife owner wipes a rag across such a knife, he or she is caressing as much as cleaning it. Part of this spirit of knife making is lost when you send the blade out for heat treating and await its return.
Every time you, the maker, release one of your knives to the world, your reputation goes with it. This is why makers feel compelled to control every step in the blade’s journey from initial design through final polishing.
No more waiting for commercial heat treating
A Paragon KM-series furnace sets the knife maker free. No more wrapping blades and shipping them to your heat treater. No more waiting until you have a dozen blades to get the best price on heat treating. No more turning away orders for last-minute gifts. What commercial shop will ever care about your knives as much as you do?
While your furnace is hardening and tempering blades, you can busy yourself grinding more knives or fitting handles. After you’ve used your Paragon furnace awhile, you will wonder how you ever got along without it.
When asked to make a knife on short notice—whether for a Marine Corps awards presentation, a sailor’s retirement party, or an archaeologist on his way to Africa—you will be ready. When a custom knife is needed as a going away gift, and the recipient is leaving in three days for the Middle East, you will be ready. Your KM-series furnace might even pay for itself on rush orders you would otherwise have missed.
Own a furnace and you alone decide when you will complete a knife. If you stay up one Friday grinding a knife, you can heat treat it that evening and deliver it Saturday morning--just in time for a grateful wife to present to her husband on his birthday.
Finishing a knife whenever you want will excite you. You will find yourself working into the night to complete a new design. When you send the blade out for heat treating, the excitement of making it is forgotten. By the time the blade returns, you hardly remember it.
A full range of Paragon furnace sizes
The KM-series knifemaking furnaces come in seven interior sizes:
- KM-14T and Xpress-KM-14T: 14 ½” long, 5 ½” wide, and 4 ¼” high
- KM-18T and Xpress-KM-18T: 18” long, 5 ½” wide, and 4 ¼” high
- KM-24T and Xpress-KM-24T: 24” long, 5 ½” wide, and 4 ¼” high
- KM-36T and Xpress-KM-36T: 36” long, 5 ½” wide, and 4 ¼” high
- KM-45T: 45” long, 5 ½” wide, and 4 ¼” high
- Double Barrel 18: 18” long, 11” wide, and 4 ¼” high
- Double Barrel 24: 24” long, 11” wide, and 4 ¼” high
Even if most of your knives would fit inside the KM-14T, you may ultimately be happier with the KM-24T, a popular size. Too much capacity may be better than too little. After all, it doesn’t hurt to heat shorter blades in the longer KM-24T; electrical consumption is minimal. Our newest KM-18T is mid-way in length between the KM-14T and KM-24T so you can buy just the right size for your needs.
Your choice of three temperature controllers
The Sentry 12-key controller is faster to program and has more features than the lower priced Sentry Xpress 3-key controller. Choose the controller that fits your budget.
Models with the 3-key Sentry Xpress controller: Xpress-KM-14T, Xpress-KM-18T, Xpress-KM-24T, Xpress-KM-36Tfont
Models with the 12-key Sentry controller: KM-14T, KM-18T, KM-24T, KM-36T, KM-45T, Double Barrel 18, Double Barrel 24
The standard KM furnaces can be upgraded with the Sentinel Smart Touch. Please scroll down to Options for details.
Solid furnace construction
The furnace is insulated with 3” thick refractory firebrick, which is 1/2” thicker than the standard. The elements are mounted in dropped, recessed grooves machined into the firebrick. This groove protects the element for long life and low maintenance. Elements are simple to replace because they can be lifted directly from the groove. You can replace elements following instructions in the printed manual. The firing chamber is protected by a rigid steel case. A built-in solid stand lifts the firing chamber safely off your worktable. The thermocouple wire is kept inside the control box for protection from the harsh environment of the typical bladesmith shop.
Printed instruction manuals
Your furnace includes a wiring diagram, a controller instruction manual, and a heat treating manual with heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manuals are written in plain English for the beginner.
Made in America
All Paragon furnaces are made in Mesquite, Texas USA. We are proud to support the American worker.
Optional gas injection flow meter
During heat treating, scale forms on the steel. You can eliminate most scaling by wrapping the blades in stainless steel foil. Or you can install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed. The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent some of the scaling. For more details, click on the link in the Options section below.
The knifemaking kit
In addition to the furnace, you will need a knifemaking kit, which separates the blades and holds them parallel inside the furnace. Please click the link below in the Options section.
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.
Have something good to say about the KM45T? Tell Us