J142 Kiln is a kiln used for Enameling,Glass,Wax Burnout. Better Designed Kilns From Paragon.

Kilns and Furnaces for ceramics, pottery, heat treating, enameling, dentistry, laboratory testing and glass fusing. Better Designed Kilns!

SEARCH:

J142

China Painting Decals Enameling Glass Fusing Low-Fire Ceramics

Product Videos

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Features

Paragon J-14-2

The J-14-2 is popular for heating jewelry molds. The kiln is made of ceramic fiber for fast heating and cooling. It has an infinite control switch and operates on 240 volts. Maximum temperature is 1700° F.

The J-14-2 comes with a built-in thermocouple (temperature sensor). An attachment block is mounted on the back of the furnace for easy hookup to a pyrometer or portable TnF 2 controller.

The firing chamber is a one-piece ceramic fiber shell with embedded elements. For greater thermal efficiency, the space between the steel case and the ceramic fiber shell is filled with extra ceramic fiber insulation.

The J-14-2 comes with a vent hole and steel cover in the top and door. The door seals tightly with a heavy spring latch. The controls, located in the base, stay cool for long life. No extra stand is needed.

The J-14-2 is available with an optional wax tray for lost wax casting.

Specifications

Max. Temperature	1700F 926C
Amps	10
Phase	1
Watts	2400
Nema	6-20P
Breaker Size	20
Circuit Wire Size	12 gauge
TUV tested to CSA and UL Standard 499	N
CE	N
Control Type	Infinite Control Switch
Voltage	240
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type

Front Loading Square

Sides

Understanding Chamber Measurements

Chamber Volume

0.88 CU.FT.
24.92 litres

Chamber Width

13.00 IN
330 mm

Chamber Depth

13.00 IN
330 mm

Chamber Height

9.00 IN
229 mm

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

18.00W x 21.50D x 20.50H Inches
457W x 546D x 521H mm

Ship Size

26.50W x 28.50D x 28.50H Inches
673W x 724D x 724H mm

Ship Weight

110.00 Lbs.
49.90 Kg.

Ship Method & Notations

This Kiln Ships Via Truck

Part Number

J142 * Base Model

Price

$1,250.00

Quantity

Find A Local Paragon Seller

Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

Find A Local Seller Now!

Options
	Part Number	Description	Quantity	Price
	ST8 Kiln Stand	The heavy-duty ST8 stand raises your kiln to a convenient 28" height. Begin operating your new kiln without having to find a table strong enough to support it. The table is 147 pounds of rock-solid construction. Ships fully assembled. 30 1/4" square		$405.00
	FSJ14	Recommended furniture kit for the Paragon J-14 series, E-14 series, and equivalent sized kilns. Included: 1 – C-12 Shelf (12” square x 5/8”) 4		$52.00
	Firing Safety Glasses	Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see. Paragon no longer sells firing safety glasses. Instead, y		$0.00
	DT2-7 Digital Hand-Held Pyrometer, Degrees F	Enjoy digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$84.00
	DT2-9 Digital Hand-Held Pyrometer, Degrees C	Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$84.00