GF6B Kiln is a kiln used forGlass. Better Designed Kilns From Paragon.

Kilns and Furnaces for ceramics, pottery, heat treating, enameling, dentistry, laboratory testing and glass fusing. Better Designed Kilns!

SEARCH:

GF6B

Glass Fusing

Product Videos

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Features

Paragon GF-6B Glass Fusing Kiln

Our first glass fusing kilns, the GF-series, have passed the test of time since 1985. They helped start the glass fusing revolution.

“I’ve fired your kilns all over the country during my seminars. I never hear complaints about your kilns. They are reliable and last a hell of a long time.” —Dan Fenton, Fenton Glass Studio, Oakland, California

The GF-6B manual-fire kilns uses an infinite control switch. It comes with a safety pilot light.

Plug in the 120 volt GF-6B. This kiln, of course, can be ordered for any electrical system world wide.

Heating elements in lid
Chain lid support on the GF-6B
Galvanized steel base
Reversible brick bottom
Heavy-duty stand with mar-proof plastic feet

The Fusion-6 & GF-6B Furniture Kit

Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.

1 - C-10 - 10” Hexagon Shelf

4 - 1” wide Square Posts, ½” long

1 lb. Bag Glass Separator

Specifications

Max. Temperature	1700F 926C
Amps	15
Phase	1
Watts	1800
Nema	5-15P
Breaker Size	20
Circuit Wire Size	12 gauge
TUV tested to CSA and UL Standard 499	Y
CE	N
Control Type	Infinite Control Switch
Voltage	120
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Sides	6
Chamber Volume	0.42 CU.FT. 11.89 litres
Chamber Diameter	11.00 279 mm
Chamber Depth	6.50 165 mm
Outer Size	19.00W x 20.00D x 21.00H Inches 483W x 508D x 533H mm
Ship Size	28.50W x 28.50D x 21.80H Inches 724W x 724D x 554H mm
Ship Weight	99.00 Lbs. 44.91 Kg.
Ship Method & Notations	This Kiln Ships Via Truck This kiln is subject to a UPS oversize box charge.


Part Number	GF6B * Base Model
Price	$510.00
Quantity

Options
	Part Number	Description	Quantity	Price
	STD18	18" deluxe stand with casters. Conveniently move your kiln out of the way when not in use. Heavy-duty stands remain rock-steady with power pressed steel frame and reinforced legs. 2" smooth rolling steel casters included. Quick assembly.		$100.00
	FSGF6B	Recommended furniture kit for the GF6B and equivalent sized kilns. Paragon's durable cordierite shelves resist warpage and thermal shock. They are volume-stable. (Note: The photo shows a general assortment of furniture rather than the exact contents		$33.00
	Firing Safety Glasses	Wear firing safety glasses whenever looking into the firing chamber of a hot kiln. Filters the infra-red and ultra-violet light. Reduces glare, makes pyrometric cones easier to see.		$19.50
	DT2-7 Digital Hand-Held Pyrometer, Degrees F	Enjoy digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$82.00
	ST-18 18" Tall Fusion Stand	The 18" square x 18" tall stand will raise the height of your Fusion kiln firebrick floor to 20 1/2". Very sturdy. Assembly required.		$45.00
	DT2-9 Digital Hand-Held Pyrometer, Degrees C	Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitor		$82.00
	1 inch x 3 inch Glass Window, Fusion Style	Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage from tack fu		$60.00
	Fusion 6 and 7 Bead Door	Adding the optional 2 1/2” x 6 1/2” bead door to your Fusion-6 or -7 is like buying two kilns instead of one. Not only can you fuse and slump glass, but with the bead door you can also anneal glass beads. Comes complete with bead mandrel holder.		$50.00