The vent hole in the door of my Paragon E-series kiln is punched in the steel case. But the hole has not been drilled. Did you forget to drill it?
The 1/2” hole is stamped in the case, but the firebrick behind the hole is solid so that you can drill the correct hole size for your pyrometer. If you don’t use a pyrometer, you could drill a 1/2” vent hole.
Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
Fax: 972-222-0646 Contact Us