Kiln Support
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

FAQ/Answer

Can you use the alarm to detect an over-fired kiln?

The temperature alarm on most digital controllers operates only during a firing. After the kiln fires to completion and begins to cool, the alarm is inactive. Here is how to use the alarm after the kiln fires to completion:

1) Program the alarm for 50 degrees higher than the temperature that you are firing to.

2) Add a cooling segment with a rate of 9999. This will turn off the heating elements as the kiln cools down. (To program a cooling rate, enter a target temperature that is lower than that of the preceding segment.)

After the kiln shuts off, it will begin the cooling segment. The alarm will continue to operate.



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"