Kiln Support
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

FAQ/Answer

If I turn the Limit Time dial to 5, the Kiln Sitter always shuts off at around 4. What Limit Timer settings should I use for greenware, underglaze, and glaze?

If the Kiln Sitter shuts off at around 4, then turning the dial to 5 gives you a one-hour margin of safety. This means that after the cone bends and shuts the kiln off, there is still one hour of time left on the Limit Timer. If the cone failed to bend and the Kiln Sitter did not shut off, the kiln would continue to fire for another hour until the Limit Timer shut it off. We suggest setting the Limit Timer half way between 4 and 5 so that you have only a 30-minute safety margin.



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"