Kiln Support
  
Paragon HomeKiln ProductsWhere To Buy KilnsKiln SupportAbout ParagonKiln Resellers and Dealers
Search Menu

FAQ/Answer

How do you smoothen the glass separator?

Give the shelf two or three thin coats of glass separator, changing the direction of the brush stroke each time. Apply the separator with a haik brush. After the separator has dried and the shelf is cool, you can smoothen the separator by rubbing your palm lightly over the shelf.

A more advanced technique is to fire the freshly applied glass separator to around 1000 degrees F. After the shelf cools, rub grit cloth over the glass separator. (Grit cloth is similar to sand paper except that it is an abrasive-coated mesh that allows residue to pass through. It can be rinsed with water and reused many times.)

As you rub the glass separator, watch the brush-stroked surface. Remove just enough glass separator to remove the brush strokes. It takes just a moment to make the surface very smooth.



Paragon Kilns on FacebookParagon Kilns on Twitter Paragon Kilns on YouTube Paragon RSS Feed

Kilns Sold

Get The Adobe Reader

Home

  • Home
  • Privacy Statement
  • Legal Notice
  • Paragon's Green Statement
  • Where To Buy Kilns
  • Resellers
  • About Us
  • Contact Paragon
  • News & Events
  • Support

  • Kiln Technicians
  • Kiln Support
  • Products

  • Bead Kiln
  • Glass Blower's Crucible Furnace
  • Ceramic Kilns
  • China Painting Kilns
  • Enameling Kilns
  • Industrial Furnaces
  • Glass Kilns
  • Lamp Working Kilns
  • Pottery/Ceramic and Glass
  • Pottery Kilns
  • Silver Clay Kilns
  • Wax Burnout Furnaces
  • Heat Treating Furnaces
  • Knife Making Furnaces
  • Custom Furnaces
  • Discontinued Models
  • “Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
    dentistry, laboratory, and glass fusing.
    Better Designed Kilns from Paragon Industries!"